Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$74.95
e*thirteen Press Fit Bottom Brackets - Adapts all e-thirteen and older Fifteen.G cranks to BB89.5 BB92 frames - Custom angular contact bearings TiNi models feature Ti Nitride races - EV-8015 includes chainline spacer kit for LG1 and non-APS cranks - e*thirteen's BB92 bottom bracket uses industry-exclusive dual-row bearings to fit big performance into a small BB shell - A center tube helps seal the BB shell - For 41mm ID pressfit frames - Bearings feature high-performance seals, and a custom grease specification delivers supreme durability and smooth spinning performance
$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
$21.95
Roadlink Rear Derailleur Part - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details
$29.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 148x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
$17.99
Flat mount front adapter for both 140mm or 160mm rotors. All mounting hardware included in package.
$30.00
- Replacement pads & holders w/ Velcro; for Specialized Carbon Aerobar or Specialized Hydroformed Alloy Aerobar
$20.00
A 7x9 rail clamp for the 2014 Command Posts that gives the you the ability to run a Specialized carbon-railed saddle - Compatible with “Alien Head style” Command Post BlackLite and IR models - 7x9 rail clamps allow the use of carbon railed saddle on your mountain bike
$15.00
Add a rack to your frame, even if you don’t have rack mounts. Allows standard rack stays to be bolted directly to the seat collar, for a clean and simple look. Made from lightweight aluminum for durability, with threaded inserts to bolt the stays directly into the seat clamp. - 35mm inner diameter fits all alloy Specialized MTB frame designs with 30.9mm posts and 35mm O.D. seat tubes. - 37mm inner diameter fits all carbon Specialized MTB frame designs with 30.9mm posts and 37mm O.D. seat tubes.
$9.00
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
$16.99
QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool
$17.99
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
$32.00
Rack-Locks keep your seatpost in place and provide a mounting position for the front struts of a rack. - 34mm-wide rack mount threaded for M5 bolts - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - For smooth operation, lightly grease the bolt threads
$18.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
$18.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$59.00 - $70.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
$183.00
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update, it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top-level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. - The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests smaller increments of movement are achieved – making it simple to fine-tune a riders position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 50a extensions offer a 50° ski bend shape. The 50a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
$30.00
Profile Design’s Venturi Arm Rest Kit is the correct model for your Profile Design Century Aerobars (sold separately). The foam arm pads have adhesive backing and the kit includes all necessary hardware.
$59.99
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!
$9.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
$7.49
Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter
$9.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$4.05
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$33.99
The Pro Braze-On Chain Catcher from K-EDGE is used by most professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The Pro model is designed to improve on the original K-EDGE Chain Catcher design: - Easier Installation – Independent setup and installation of front derailleur and the K-EDGE Chain Catcher - Stronger – Separate and lower attachment /adjustment bolt equates to stronger hold ensuring the chain cannot drop below the chain catcher - Optimized Design – Unique curved ramp profile enables quicker chain engagement with the chain ring while eliminating dropped chains - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamp. Shimano - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
$7.99
Heavy duty bolt-on aluminum seatpost clamp.
$7.99
Dimension Seatpost Binder Bolts - 16g
$45.99
- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation
$38.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
$16.99
Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands
Page 1 of 2 Next page